Auris Audio Phonio Light Phono amplifier
About the Auris Audio Phonio Light Phono amplifier
Auris Audio Phonio Light is a Phono amplifier with separate MM and MC inputs selected using switches on the front of the unit.
In the Phonio Light, Sound Plus operational amplifiers are connected in an advanced topology that ensures accurate RIAA equalization. While preserving all the good sounds in the audible frequency range. While suppressing hum and bad harmonics that create an unpleasant feeling while listening.
The unit comes with a 16V AC adapter that is small enough not to get in the way. And at the same time can be moved away from the unit. This avoids interference and allows the power supply circuit to reduce noise as much as possible.
In the Phonio light, capacitors are used whose capacity is larger than 5000uF for better filtration. In order to get an ultra-low noise, they also use an LDO in combination with a BJT to get a power topology with a large PSRR (power supply rejection ratio).
Specifications of the Auris Audio Phonio Light Phono amplifier
| MM | MC | |
| Max input level [at 1kHz] |
60mV | 4mV/ Low gain |
| maximum output | 5V | 5V |
| Gain | 43.2dB | Low 58dB, Mid 64dB, High 67dB |
| SNR[un-weighted] | > 88dB | >70.5dB low gain at 1V Bandwidth |
| THD + N |
0.0035% at 1V | 0.023% at 1V Bandwidth 100Hz – 22kHz (-9dB low gain) |
| THD | 0.0003 % | 0.002 % |
| Freq. Response [20Hz-80kHz] |
± 0.3dB | ± 0.3dB |
| RIAA accuracy | ± 0.3dB | ± 0.3dB |
| Input sensitivity | 725mV [5mV input] | [0dB High gain]: 0.5mV for 1.15V output [-3dB Mid gain]: 0.5mV for 0.75V output [-9dB Low gain]: 0.5mV for 0.4V output |
Even more from the phono amplifier category.
Still haven't found what you're looking for? These products might be just what you're looking for.










